Wood Temporary Staffing is currently seeking qualified candidates to fill various production painting positions in the Michiana area. If you are searching for work and have manufacturing experience please see the current openings listed below that need to be filled immediately. Wood Staffing has many other positions that are needing to be filled throughout the Michiana area. Feel free to view our job board to find the right job for you. If you would like to apply please apply online or contact us at 269-925-6767 or 574-234-6767 to inquire about any of our open positions.


Open Jobs:

1st shift Painter

1st shift opportunity with Berrien County Manufacturer. Will work 6:00am-2:30pm Monday-Friday with additional Saturday overtime as needed. This position will involve preparing items for painting, mixing paints and painting component parts and equipment using paint pot and air paint spray gun. Temp to hire position starting out at $15.00/hr-$18.00/hr depending on experience. Qualified candidates can apply online at and contact TeKyrua R. at 269-588-4533 with questions.

• Inspect items to be painted for proper welds
• Remove weld spatter and excess weld, sharp edges and burrs using a wire wheel, air chisel, electric grinder or file
• Clean and prepare the surface to be painted – wiping down with paint thinner to remove grease, dirt, and oil and masking off areas not requiring paint
• Apply primer coat, buff out primer runs and mix paint with thinner
• Paint product according to specifications using paint pot and air paint spray gun
• Check product for necessary paint touch-up after item is re-assembled
• Install data plates, warning labels and other signs
• Clean painting equipment and paint booth, inventory, requisition and rotate paint stock
• Read blueprints, diagrams and/or schematic and job orders
• One to two years related experience and/or training or equivalent combination of education and experience
• Ability to accurately measure with a tape measure and square to 1/32″ and convert decimals to fractions
• Ability to read blueprints and schematics and able to distinguish stainless steel, carbon steel and aluminum
• Be able to regularly lift and/or move up to 50 pounds

2nd Shift Powder Coat Painter

• Assist each Powder Room Station in setup for job
• Oversee coating booth and gun setup per job
• Assure all job-related materials are on hand and ready for use (masks, plugs, powder, etc)
• Visually inspect product for coating or part defect before leaving the powder room
• Preventative Maintenance when required and keep work area clean and free of debris
• May be required to stand the entire shift to perform job
• Ability to understand and follow instructions
• Demonstrate communication skills and manual dexterity
• Must have at least 1 year experience with powder coat paint application
• Must have reliable transportation and stable work history

Temp to Hire position starting out at $19.00/hr. ($17.00/hr. + $2.00/hr. Shift Premium) Hours: 2:00PM-10:00PM Monday-Friday (Overtime as needed) Qualified candidates please contact Carrie at 269-605-4133.


To apply go to